Trendnet tv-ip212  User Guide

 

- 26 -

If you are failed to access to the camera, please check the IP address of 
your computer. When you connect the camera to your computer directly 
to proceed with configuration of the camera, you need to set up the IP 
addresses to be in the same segment for the two devices to communicate. 

1.  On your computer, click Start > Control Panel to open the Control 

Panel window. 

2.  Double-click Network Connection to open the Network 

Connection window. 

3.  Right-click Local Area Connection and then click Properties from 

the shortcut menu. 

4.  When the Local Area Connection Properties window appears, select 

the General tab. 

5.  Select Internet Protocol [TCP/IP] and then click Properties to 

bring up the Internet Protocol [TCP/IP] Properties window. 

6.  To configure a fixed IP address that is within the segment of the 

camera, select the Use the following IP address option. Then, enter 
an IP address into the empty field. The suggested IP address is 

192.168.10.x

 (

x

 is 0~254 except 30), and the suggested Subnet 

mask is 

255.255.255.0

. 

7.  When you are finished, click OK.