Trendnet tv-ip212Â User Guide
- 43 -
Format: Once you enable the Encryption feature, you need to
determine the encryption format by selecting ASCII or HEX.
ASCII format causes each character you type to be interpreted
as an eight-bit value. Hex format causes each pair of characters
you type to be interpreted as an eight-bit value in hexadecimal
(base 16) notation.
determine the encryption format by selecting ASCII or HEX.
ASCII format causes each character you type to be interpreted
as an eight-bit value. Hex format causes each pair of characters
you type to be interpreted as an eight-bit value in hexadecimal
(base 16) notation.
Key Length: Select the WEP key length you use: 64 bits or
128 bits.
128 bits.
WEP Key 1/2/3/4: Enter the WEP key(s) in the following
boxes.
boxes.
If you select WPA-PSK or WPA2-PSK as the Authentication
mode, you need to complete the following settings:
mode, you need to complete the following settings:
Encryption: Select TKIP or AES. TKIP (Temporal Key
Integrity Protocol) changes the temporal key every 10,000
packets to insure much greater security than the standard WEP
security. AES (Advanced Encryption Standard) is used to
ensure the highest degree of security and authenticity for digital
information.
Integrity Protocol) changes the temporal key every 10,000
packets to insure much greater security than the standard WEP
security. AES (Advanced Encryption Standard) is used to
ensure the highest degree of security and authenticity for digital
information.
Pre-Shared Key: This is used to identify each other in the
network. Enter the name in the box, and this name must match
the Pre-shared key value in the remote device.
network. Enter the name in the box, and this name must match
the Pre-shared key value in the remote device.