Trendnet tv-ip301Â User Manual

Q1:

Q2:

A2:

Q3:

A3:

Q4:

A4:

Q5:

A5:

The image is blurry. How do I fix this?

You can adjust the Internet Camera's focus by rotating the lens.

How do I configure TCP/IP settings on my computer?

When I click on Live Show Active X, the image does not load?

First, make sure that you are using a browser that supports Active X. Second,

make sure that Active X is installed.

How do I connect the TV-IP301W to my wireless router or access point?

Make sure that you configure the camera to have the same SSID, encryption

mode and key (if enabled). Follow the instructions in section 2 to configure the
camera with the SSID and encryption key.

After I successfully configured the TV-IP301W to match my wireless network

settings, I can not connect to the camera.

First, verify that the wireless settings match your wireless network settings.

Second, verify in the wireless section of the browser configuration that the

Disable

Wireless Communication option is not checked. Third, make sure to disconnect
the Ethernet cable from the camera and verify that the

LINK LED is blinking green.

If you still encounter problems or have any questions regarding the

TV-IP301/

TV-IP301W, please contact TRENDnet's Technical Support Department.

Troubleshooting

1. Go into the Control Panel and double-

click the

Network Connections icon,

and then right-click the

Local Area

Connection icon and then click

Properties.

2. Click Internet Protocol (TCP/IP) and

then click

Properties. Then click on

Use the following IP address, and
make sure you assign your network
adapter an IP address in the subnet of
192.168.1.x.