3com 8807 Reference Guide

C

HAPTER

 63: P

ORT

 P

ACKET

 S

TATISTICS

 C

OMMANDS

(DP) can also be monitored. When monitoring a card, the counters can monitor all 
TCs and all DPs.

After you user the set egress counter command to set the monitoring mode of a 
card, the counters will be automatically reset.

By default, a card does not implement egress packet statistics.

Related command: display egress.

Note that:

■

You cannot configure ports as the objects to be monitored by the egress packet 
statistics counters on GV48D, GT24D, GP24D, XP4B and XP4CA cards.

■

After successful configuration, it is necessary to reset the counters to start 
counting again.

# Set the egress packet statistics mode of Counter 0 on slot 4 so that it monitors 
port GigabitEthernet4/1/1.

[SW8800] set egress counter0 slot 4 interface GigabitEthernet4/1/1 

display egress { counter0 | counter1 } slot slot-num [ clear ]

Any view

counter0: Counter 0, used for packet statistics monitoring.

counter1: Counter 1, used for packet statistics monitoring.

slot-num: Card slot number.

clear: Clears the counting data after a counter is read.

Use the display egress command to display egress packet statistics information 
and the monitoring objects of a counter. To clear the counter data, include the 
parameter clear in the command.

Related command: set egress counter.

# Query the egress packet statistics information of slot 4, and then clear the 
counter.

[SW8800] display egress counter0 slot 4 clear

 

Slot 4 egress counter0 mode:

 

  Interface: all

 

  VLAN: all

 

  Traffic Class: all