3com 8807 Reference Guide

C

HAPTER

 17: Q

O

S C

OMMANDS

# Display parameter configuration of traffic rate limitation,.

<SW8800> display qos-interface traffic-limit

 

GigabitEthernet2/1/1: traffic-limit

 

 Inbound:

 

   Matches: Acl 2020 rule 0  running

 

     Committed Information Rate: 1000 Kbps

 

     Committed Burst Size: 1000 byte(s)

 

     Excess Burst Size: 1000 byte(s)

 

     Peak Information Rate: 0 Kbps 

display qos-interface [ interface-type interface-number ] traffic-priority

Any view

interface-type interface-number: Port of the switch, for detailed description, 
please refer to Command Manual - Port.

Use the display qos-interface traffic-priority command to view traffic priority 
configuration of a port, including the target ACL, priority type, priority values etc.

Related command: traffic-priority.

# Display traffic priority marking configuration.

<SW8800> display qos-interface traffic-priority

 

GigabitEthernet2/1/1: traffic-priority

 

 Inbound:

 

   Matches: Acl 2021 rule 0  running

 

     Priority action: remark-policed-service, dscp: 20 

display qos-interface [ interface-type interface-number ] traffic-redirect

Any view

interface-type interface-number: Port of the switch, for detailed description, 
please refer to Command Manual - Port.

Use the display qos-interface traffic-redirect command to view traffic 
redirection configuration of a port, including the target ACL, target port etc.

Related command: traffic-redirect.