3com 8807 Reference Guide

C

HAPTER

 17: Q

O

S C

OMMANDS

Use the display qos-vlan traffic-limit command to display the parameter 
configuration for traffic limit in VLAN, including the configuration information 
about related ACL and policing actions.

Related command: traffic-limit and traffic-params.

# Display the parameter configuration of traffic limit in VLAN.

<SW8800> display qos-vlan traffic-limit

 

Vlan 1 traffic-limit

 

 Inbound:

 

   There is no configuration.

 

Outbound:

 

   There is no configuration

 

Vlan 2 traffic-limit

 

 Inbound:

 

   Matches: Acl 2000 rule 3  running (Action-type: Eacl, Destination slot: 3)

 

     Committed Information Rate: 8192 Kbps

 

     Committed Burst Size: 10000 byte(s)

 

     Excess Burst Size: 20000 byte(s)

 

     Peak Information Rate: 0 Kbps

 

     Exceed action: drop         

 

Outbound:

 

  There is no configuration. 

display qos-vlan [ vlan-id ] traffic-priority

Any view

vlan-id: ID of a VLAN, in the range of 1 to 4094.

Use the display qos-vlan traffic-priority command to display the priority 
marking configuration in VLAN, including the ACL associated with the traffic 
priority marking, the type and value of the priority marking.

Related command: traffic-priority.

# Display the priority marking configuration in VLAN.

<SW8800> display qos-vlan traffic-priority

 

Vlan 1 traffic-priority

 

 Inbound:

 

   There is no configuration.

 

Outbound:

 

   There is no configuration

 

Vlan 2 traffic-priority

 

 Inbound:

 

   Matches: Acl 2000 rule 1  running (Action-type: Eacl, Destination slot: 3)

 

     Priority action: remark-policed-service, untrusted, dscp: 13, cos: 6, 

 

local-precedence: 6, drop-priority: 1           

 

 Outbound:

 

  There is no configuration.