3com 8807 Reference Guide

C

HAPTER

 17: Q

O

S C

OMMANDS

If the mirroring-group has been configured, the system will prompt "The 
mirroring-group has been configured!"

port interface-list

undo port interface-list

Port group view

interface-list: Ethernet port list to be added to a port group or to be deleted from 
a port group, in the format of interface-lis t= { interface-type interface-number [ to 
interface-type interface-number ] }&<1-n>. interface-type indicates a port type 
and interface-number indicates a port number. The port number after the 
keyword to must be greater than or equal to that before the keyword to. &<1-n> 
indicates that you can input the preceding parameters for up to n times. n 
indicates the maximum number of ports allowed to be added to a port group.

Use the port command to add a port to a port group.

Use the undo port command to add remove a port from a port group.

For common interface cards except for the XP4 card, confider the following issues:

■

Do not add the ports of different cards to the same port group. Do not add the 
same port to multiple port groups at the same time.

■

Do not add aggregated ports in the port group. If a port in the port group 
needs to be aggregated, the port must quit the port group first. The port 
configuration is overwritten by that of the primary port in the aggregation 
group.

■

After a port is added to the port group, the port configuration is overwritten by 
that of the port group. You cannot apply the ACL rule as per port.

■

When the port group is null, it is not allowed to configure QACL. After all the 
members quit the port group, the QACL configuration of the port group is 
remained. When a new port joins the port group, QACL will be applied to the 
port automatically.

# Add Ethernet3/1/1, Ethernet3/1/2, and Ethernet3/1/3 to port group 1.

<SW8800> system-view

 

System View: return to User View with Ctrl+Z.

 

[SW8800]port-group 1  

 

[3Com-port-group1] port Ethernet3/1/1 Ethernet3/1/2 Ethernet3/1/3

 

The original rule on the port will be deleted.

 

Are you sure?[Y/N] y

 

Add port Ethernet3/1/1...

 

Add port Ethernet3/1/2...

 

Add port Ethernet3/1/3...