3com 8807 Reference Guide

C

HAPTER

 21: AAA 

AND

 RADIUS/HWTACACS P

ROTOCOL

 C

ONFIGURATION

 C

OMMANDS

retry-times: The maximum number of stop-accounting request attempts. It is in 
the range 1 to 300 and defaults to 100.

Use the retry stop-accounting command to enable stop-accounting packet 
retransmission and configure the maximum number of stop-accounting request 
attempts.

Use the undo retry stop-accounting command to restore the default setting.

By default, stop-accounting packet retransmission is enabled and up to 100 
packets are allowed to be transmitted for each request.

Related command: reset stop-accounting-buffer, hwtacacs scheme, and 
display stop-accounting-buffer.

# Enable stop-accounting packet retransmission and allow up to 50 packets to be 
transmitted for each request.

[SW8800] retry stop-accounting 50 

secondary accounting ip-address [ port-number ]

HWTACACS view

ip-address: IP address of the server, a valid unicast address in dotted decimal 
format.

port-number: Port number of the server, which is in the range 1 to 65535 and 
defaults to 49.

Use the secondary accounting command to configure a secondary TACACS 
accounting server.

Use the undo secondary accounting command to delete the configured 
secondary TACACS accounting server.

By default, IP address of TACACS accounting server is all zeros.

You are not allowed to assign the same IP address to both primary and secondary 
accounting servers.

If you repeatedly use this command, the latest configuration overwrites the 
previous one.