3com 8807 Reference Guide
OSPF Configuration Commands
457
Example
# Enable the TRAP function for OSPF process 100.
[SW8800] snmp-agent trap enable ospf 100
spf-schedule-interval
Syntax
spf-schedule-interval interval
undo spf-schedule-interval
View
OSPF view
Parameter
interval: SPF calculation interval of OSPF, which is in the range of 1 to 10 and is
measured in seconds. The default value is five seconds.
measured in seconds. The default value is five seconds.
Description
Use the spf-schedule-interval command to configure the route calculation
interval of OSPF.
interval of OSPF.
Use the undo spf-schedule-interval command to restore the default setting.
According to the Link State Database (LSDB), the router running OSPF can
calculate the shortest path tree taking itself as the root and determine the next
hop to the destination network according to the shortest path tree. By adjusting
SPF calculation interval, frequent network change can be restrained, which may
lead to excessive bandwidth and router resource consumption.
calculate the shortest path tree taking itself as the root and determine the next
hop to the destination network according to the shortest path tree. By adjusting
SPF calculation interval, frequent network change can be restrained, which may
lead to excessive bandwidth and router resource consumption.
Example
# Set the OSPF route calculation interval of 3Com to six seconds.
[3Com-ospf-1] spf-schedule-interval 6
stub
Syntax
stub [ no-summary ]
undo stub
View
OSPF area view
Parameter
no-summary: ABR is disabled to transmit Summary LSAs to the Stub area.
Description
Use the stub command to configure an OSPF area as Stub area.
Use the undo stub command to cancel the settings.
By default, no area is set to be a Stub area.