3com 8807 Reference Guide
26
I
NTEGRATED
IS-IS C
ONFIGURATION
C
OMMANDS
n
When a switch runs a routing protocol, it can perform the router functions. A
router that is referred to in the following or its icon represents a generalized router
or an Switch 8800 Family series routing switch running routing protocols. To
improve readability, this will not be described in the other parts of the manual.
router that is referred to in the following or its icon represents a generalized router
or an Switch 8800 Family series routing switch running routing protocols. To
improve readability, this will not be described in the other parts of the manual.
For the configuration of VPN instance, refer to the MPLS module in 3Com Switch
8800 Family Series Routing Switches Operation Manual.
8800 Family Series Routing Switches Operation Manual.
Integrated IS-IS
Configuration
Commands
Configuration
Commands
area-authentication-mo
de
Syntax
area-authentication-mode { simple | md5 } password [ ip | osi ]
undo area-authentication-mode { simple | md5 } [ ip | osi ]
View
IS-IS view
Parameter
simple: Configures to transmit the password in simple text.
md5: Configures to transmit the password encrypted with MD5 algorithm.
password: Configures a password. If simple authentication is used, the password
must be a simple-text password. If MD5 authentication is used, the password can
be a simple-text or a cipher-text password. A simple-text password can be a
character string with no more than 16 characters, for example, 3com918. Note
that the simple-text password defined for MD5 authentication is displayed in
cipher text. A cipher-text password must have 24 characters in cipher text, for
example, (TT8F]Y5SQ=^Q‘MAF4<1!!.
must be a simple-text password. If MD5 authentication is used, the password can
be a simple-text or a cipher-text password. A simple-text password can be a
character string with no more than 16 characters, for example, 3com918. Note
that the simple-text password defined for MD5 authentication is displayed in
cipher text. A cipher-text password must have 24 characters in cipher text, for
example, (TT8F]Y5SQ=^Q‘MAF4<1!!.
ip: If this argument is configured, the system checks the corresponding IP field in
LSP.
LSP.
osi: If this argument is configured, the system checks the corresponding OSI field
in LSP.
in LSP.
The configuration of ip or osi authentication password is independent of the real
network environment.
network environment.