3com 8807 Reference Guide

<SW8800>system-view

 

System View: return to User View with Ctrl+Z.

 

[SW8800] user-interface vty 0 4

 

[3Com-ui-vty0-4] undo shell 

speed speed-value

User interface view

speed-value: Specifies the transmission rate on the user interface in bps, which can 
be 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, or 115200. The 
default rate is 9600 bps.

Use the speed command to configure the transmission rate on the user interface.

Use the undo speed command to restore the default rate.

This command can only be performed in Console and AUX user interface view.

Note that AUX user interface does not support the transmission rate: 57600 bps 
and 115200 bps.

# Configure the transmission speed on the AUX port as 4800 bps.

<SW8800>system-view

 

System View: return to User View with Ctrl+Z.

 

[SW8800] user-interface aux 0

 

[3Com-ui-aux0] speed 4800 

stopbits { 1 | 1.5 | 2 }

User interface view

1: Sets 1 stop bit.

1.5: Sets 1.5 stop bits.

2: Sets 2 stop bits.