3com 8807 Reference Guide

neighbor-address: Neighbor address.

interface interface-type interface-number: Specifies interface.

Use the reset pim neighbor command to clear a PIM neighbor.

Related command: display pim neighbor.

# Clear the PIM neighbor 25.5.4.3.

<SW8800> reset pim neighbor 25.5.4.3 

reset pim routing-table { all | { group-address [ mask group-mask | 
mask-length group-mask-length ] | source-address [ mask source-mask | 
mask-length source-mask-length ] | { incoming-interface interface-type 
interface number | null } } * }

User view

all: All PIM neighbors.

group-address: Group address.

mask group-mask: Specifies group mask.

mask-length group-mask-length: Mask length of the group address.

source-address: Source address.

mask source-mask: Specifies source mask.

mask-length source-mask-length: Specifies mask length of the group address.

incoming-interface: Specifies incoming interface for the route entry in PIM 
routing table.

interface-type interface-number: Interface type and interface number, used to 
specify the interface.

Use the reset pim routing-table command to clear a PIM route entry.

You can type in source address first and group address after in the command, as 
long as they are valid. Error information will be given if you type in invalid 
addresses.

If in this command, the group-address is 224.0.0.0/24 and source-address is the 
RP address (where group address can have a mask, but the resulted IP address