3com 8807 Reference Guide

out-label: Value of the out-label, ranging from 16 to 1,023.

Use the static-lsp transit command to create a static L2VPN LSP for the midway 
transmitting LSR.

Use the undo static-lsp transit command to remove the static L2VPN LSP created 
for the midway transmitting LSR.

You need to create two LSPs (for transmitting and receiving) before creating a 
remote CCC connection. You also need to enable the two LSPs to traverse 
through each of the midway LSRs.

Related command: static-lsp egress l2vpn, static-lsp ingress l2vpn.

# Create a static L2VPN LSP for the interface of VLAN 201 on the midway 
transmitting LSR, with the in-label of 123 and the out-label of 253.

[3Com-mpls] static-lsp transit bj-sh l2vpn incoming-interface vlan-

 

interface 201 in-label 123 nexthop 202.34.114.7 out-label 253 

display mpls l2vc [ interface vlan-interface vlan-id | verbose ]

Any view

vlan-id: ID of the VLAN whose interface is used to create the virtual circuit.

verbose: Displays the detailed information.

Use the display mpls l2vc command to display the VC information of Martini 
VLL.

# Display detailed VC information.

<SW8800> display mpls l2vc verbose

 

Interface: Vlan-interface1000State: down, Encapsulation: ethernet, 

 

Service: VLL

 

 
 VC-ID: 4294967295, VC State: down, Destination: 3.3.3.3

 

  Group ID: Local 0, Remote 0, VC Label: Local 32770, Remote 0,

 

  Tunnel Type: LSP, Tunnel Index: 25