3com 8807 Reference Guide

C

HAPTER

 60: I

NFORMATION

 C

ENTER

channel-name: Channel name. The name can be channel7, channel8, channel9, 
console, logbuffer, loghost, monitor, snmpagent, trapbuffer, logfile.

Use the info-center monitor channel command to configure the channel to 
output the log information to the user terminal.

Use the undo info-center monitor channel command to restore the channel to 
output the log information to the user terminal to default value.

By default, Ethernet switches do not output log information to user terminal.

This command takes effect only after system logging is started.

Related command: info-center enable, display info-center.

# Configure channel 0 to output log information to user terminal.

<SW8800> system-view

 

System View: return to User View with Ctrl+Z.

 

[SW8800] info-center monitor channel 0 

info-center snmp channel { channel-number | channel-name }

System view

channel-number: Channel number, ranging from 0 to 9, that is, the system has ten 
channels. By default, channel 5 is used.

channel-name: Channel name. The name can be channel7, channel8, channel9, 
console, logbuffer, loghost, monitor, snmpagent, trapbuffer, logfile.

Use the info-center snmp channel command to configure new channel for 
transmitting the SNMP information.

Use the undo info-center snmp channel command to restore the default 
channel for transmitting the SNMP information.

The default channel for transmitting the SNMP information is channel 5.

Related command: display snmp.

# Configure channel 6 as the SNMP information channel.