3com 8807 Reference Guide

vlan-id-list: vlan-id-list = [ vlan-id1 [ to vlan-id2 ] ]&<1-10>: Specifies which VLAN 
the hybrid port will be added to. It can be discrete. The vlan-id ranges from 1 to 
4,094. &<1-10> indicates that the former parameter can be input 10 times 
repeatedly at most.

tagged: Packet of specified VLAN will have tag.

untagged: Packet of specified VLAN will not have tag.

Use the port hybrid vlan command to join the hybrid port to specified existing 
VLAN.

Use the undo port hybrid vlan command to cancel the hybrid port from the 
specified VLAN.

Hybrid port can belong to multiple VLANs. If the port hybrid vlan vlan-id-list { 
tagged | untagged } command is used for many times, the VLANs carried by the 
hybrid port is the set of vlan-id-list.

This command can be used on condition that the VLAN specified with vlan-id must 
have been existed.

Related command: port link-type.

# Join hybrid port Ethernet2/1/1 to VLAN of 2, 4 and 50-100, and these VLAN will 
have tags.

<SW8800> system-view

 

System View: return to User View with Ctrl+Z.

 

[SW8800] interface ethernet2/1/1

 

[3Com-Ethernet2/1/1] port hybrid vlan 2 4 50 to 100 tagged 

port link-type { access | hybrid | trunk }

Ethernet port view

access: Configures the port as access port.

hybrid: Configures the port as hybrid port.

trunk: Configures the port as trunk port

Use the port link-type command to configure the link type of Ethernet port.