3com 8807 Reference Guide

C

HAPTER

 22: P

ORTAL

 C

ONFIGURATION

 C

OMMANDS

If the user PC still does not respond after the sending times exceed the retry times, 
the switch will regard the handshakes as abnormal, cut the connection with this 
user actively and notify the Portal server about this case.

This command is ineffective for the Layer 3 Portal authentication method.

# Set the interval of handshakes between the switch and the host to 120 seconds, 
and set the maximum retry times to six times.

<SW8800>system-view

 

System View: return to User View with Ctrl+Z. 

 

[SW8800] portal arp-handshake interval 120 retry-times 6 

portal auth-network network-address net-mask vlan vlan-id

undo portal auth-network { network-address net-mask | vlan vlan-id | all }

System view

network-address net-mask: Address and subnet mask of the authentication 
network section.

vlan-id: ID of the VLAN where the access port (where the authentication users 
access into the switch across the network) lies in.

all: Disables all the configured authentication network sections.

Use the portal auth-network command to configure the authentication network 
section of a Portal client.

Use the undo portal auth-network command to disable the authentication 
network section for a Portal client.

No authentications network section is configured by default.

This command is effective only for the Layer 3 Portal authentication method.

# Configure the authentication network section for a Portal client: 
192.168.0.200/16.

<SW8800>system-view

 

System View: return to User View with Ctrl+Z. 

 

[SW8800] portal auth-network 192.168.0.200 255.255.0.0 vlan 1 

portal delete-user ip-address