3com 8807 Reference Guide

Ethernet port view

None

Use the portal upload-interface command to enable the Portal rate limit 
function on the upload interface.

Use the undo portal upload-interface command to disable the Portal rate limit 
function.

By default, the Portal rate limit function is disabled.

The Portal rate limit function is used together with the bandwidth limit service that 
the CAMS server provides. The bandwidth limit service is that you can specify the 
bandwidth for each user when you are configuring the service for each user on 
the CAMS server.

The principle of Portal rate limit is as follows: when the switch receives the 
bandwidth limit rules for Portal users from the CAMS server, the switch will limit 
the traffic on the upload interface where the portal upload-interface command 
is executed, that is to say, the switch will perform bandwidth control for the 
upload rates of Portal users. An upload interface is the interface to connect the 
switch with the upstream network devices.

c 

# Configure Ethernet2/1/43 as the upload interface for Portal rate limit.

<SW8800>system-view

 

System View: return to User View with Ctrl+Z. 

 

[SW8800]interface Ethernet 2/1/48 

 

[3Com-Ethernet2/1/43]portal upload-interface 

reset portal { acm | server | tcp-cheat } statistics

User view

acm: Clears the statistics about ACM, that is to say, clears the statistics about the 
state machines related with authentication, connection and management.