3com 8807 Reference Guide

C

HAPTER

 23: S

TATIC

 R

OUTE

 C

ONFIGURATION

 C

OMMANDS

4.4.4.1/32         DIRECT       0   0       127.0.0.1    InLoopBack0

 

127.0.0.0/8        DIRECT       0   0       127.0.0.1    InLoopBack0

 

127.0.0.1/32       DIRECT       0   0       127.0.0.1    InLoopBack0 

display ip routing-table acl { acl-number | acl-name } [ verbose ]

Any view

acl-number: The number of basic ACL, ranging from 2000 to 2999.

acl-name: The basic ACL name introduced via names.

verbose: With the parameter, this command displays the verbose information of 
both the Active and Inactive routes that passed filtering rules. Without the 
parameter, this command only displays the summary of the Active routes that 
passed filtering rules.

Use the display ip routing-table acl command to view the route filtered through 
specified basic access control list (ACL).

This command is used in track display of route policy to display the route that 
passed the filtering rule according the input basic ACL number or name.

The command is only applicable to display the route that passed basic ACL 
filtering rules.

# Display the summary of Active routes that are filtered through basic acl 2000.

[SW8800] acl number 2000

 

[3Com-acl-basic-2000] rule permit source 10.1.1.1 0.0.0.255

 

[3Com-acl-basic-2000] rule deny source any

 

[3Com-acl-basic-2000] display ip routing-table acl 2000

 

Routes matched by access-list 2000:

 

Summary count: 4

 

Destination/Mask   Protocol Pre  Cost        Nexthop       Interface

 

10.1.1.0/24 DIRECT  0   0   10.1.1.2        Vlan-interface1

 

10.1.1.2/32 DIRECT  0   0   127.0.0.1      InLoopBack0 

Table 48   Description of the fields of the display ip routing-table command

Destination/Mask  Destination address/Mask length 

Protocol 

Routing protocol 

Pre 

Routing preference 

Cost 

Cost 

Nexthop 

Next hop address 

Interface 

Output interface, through which the data packet destined for the 
destination network segment is sent