3com 8807 Reference Guide

C

HAPTER

 25: OSPF C

ONFIGURATION

 C

OMMANDS

display ospf [ process-id ] routing

Any view

process-id: ID of an OSPF process. The command is applied to all current OSPF 
processes if you do not specify a process ID.

Use the display ospf routing command to view information about the OSPF 
routing table.

# View the OSPF routing table.

<SW8800> display ospf routing

 

OSPF Process 1 with Router ID 1.1.1.1

 

Routing Tables

 

Routing for Network

 

Destination             Cost Type NextHop         AdvRouter        Area

 

10.110.0.0/16              1 Net  10.110.10.1     1.1.1.1          0

 

10.10.0.0/16               1 Stub 10.10.0.1       3.3.3.3          0

 

Total Nets: 2

 

  Intra Area: 2  Inter Area: 0  ASE: 0  NSSA: 0 

Table 65   Description of the fields of the display ospf retrans-queue command

RouterID 

Router ID of neighbor router 

Address 

Address of the interface, through which neighbor routers communicate with the 
router 

Interface 

Address of the interface on the network segment 

Area 

Number of an OSPF area 

Type 

Type of the LSA 

LSID 

Link State ID of the LSA 

AdvRouter  Router ID of the router originating the LSA

Table 66   Description of the fields of the display ospf routing command

Destination 

Destination network segment 

Cost 

Cost of route 

Type 

Type of route 

NextHop 

Next hop of route 

AdvRouter 

Router ID of the router advertising the route 

Area 

Area ID 

Intra Area 

Number of intra-area routes 

Inter Area 

Number of inter-area routes 

ASE 

Number of external routes