3com 8807 Reference Guide

Use the reset msdp statistics command to clear statistics of one or more MSDP 
peers without resetting the MSDP peer.

# Clear the statistics of the MSDP peer 25.10.7.6.

<SW8800> reset msdp statistics 125.10.7.6 

shutdown peer-address

undo shutdown peer-address

MSDP view

peer-address: IP address of MSDP peer.

Use the shutdown command to disable the MSDP peer specified.

Use the undo shutdown command to remove the configuration.

By default, no MSDP peer is disabled.

Related command: peer.

# Disable the MSDP peer 125.10.7.6.

<SW8800> system-view

 

System View: return to User View with Ctrl+Z.

 

[SW8800] msdp

 

[3Com-msdp] shutdown 125.10.7.6 

static-rpf-peer peer-address [ rp-policy ip-prefix-name ]

undo static-rpf-peer peer-address

MSDP view

peer-address: Address of the static RPF peer to receive SA messages.

rp-policy ip-prefix-name: Filter policy based on RP address, which filters the RP in 
SA messages. If the parameter is not specified, all SA messages from static RPF 
peer will be accepted. If the parameter rp-policy ip-prefix-name is specified and 
filter policy is configured, the router will only accept SA messages from the RP