3com 8807 Reference Guide
LDP Configuration Commands
749
Example
# Set the preference of the preference of the routes learned from the EBGP peer to
2, the preference of the routes learned from the IBGP peer to 3 and the preference
of the local routes to 4.
2, the preference of the routes learned from the IBGP peer to 3 and the preference
of the local routes to 4.
[3Com-bgp-af-vpn-instance] preference 2 3 4
reflect between-clients
Syntax
reflect between-clients
undo reflect between-clients
View
VPNv4 sub-address family view
Parameter
None
Description
Use the reflect between-clients command to allow the routing reflection
between clients.
between clients.
Use the undo reflect between-clients command to forbid routing reflection
between clients (PE to PE).
between clients (PE to PE).
By default, the routing reflection between clients is allowed.
The router reflector reflects one client’s route to others after configuration.
Related command: reflect cluster-id and peer reflect-client.
Example
# Disable the routing reflection from client to client.
[3Com-bgp-af-vpn] undo reflect between-clients
reflector cluster-id
Syntax
reflector cluster-id { cluster-id | address }
undo reflect cluster-id
View
VPNv4 sub-address family view
Parameter
cluster-id: Router reflector cluster ID in number format, in the range of 1 to
4294967295.
4294967295.
address: Router reflector cluster ID in IP address format.
Description
Use the reflector cluster-id command to configure a cluster ID of router reflector.