3com 8807 Reference Guide

display vlan [ vlan-id to vlan-id | all | static | dynamic ]

Any view

vlan-id: Displays information of the specified VLAN.

all: Displays information of all VLANs.

static: Displays information of VLANs created statically by the system.

dynamic: Displays information of VLANs created dynamically by the system.

Use the display vlan command to view related information about the specified or 
all VLANs.

If vlan-id or all is specified, information of specified VLAN or all VLANs is displayed. 
It includes: VLAN ID, VLAN type (dynamic or static), whether the routing function 
has been enabled on this VLAN (if enabled, the main IP address and mask will be 
displayed), VLAN description, and the ports VLAN contains.

If parameter is not specified, information of the VLANs that has been created is 
displayed. If the parameter dynamic or static is selected, information of VLANs 
created dynamically or statically by the system is displayed.

Related command: vlan.

# Display the information about VLAN2.

[SW8800] display vlan 2

 

VLAN ID: 2

 

VLAN Type: static

 

ARP proxy disabled

 

Route interface: not configured

 

Description: VLAN 0002

 

Tagged   Ports: none

 

Untagged Ports: 

 

    Ethernet2/1/1  Ethernet2/1/2  Ethernet2/1/3 

The Maximum Transmit Unit  Maximum Transmit Unit (MTU)

Table 7   Description on the fields of the display interface Vlan-interface command

Table 8   Description on the fields of the display vlan 2 command

VLAN ID 

VLAN ID 

VLAN Type 

Configuration type of VLAN: either dynamic or static 

Route interface 

Whether the route interface exists