3com 8807 Reference Guide

From server to client:

 

Interface: VLAN-Interface 1

 

ServerGroupNo: 0

 

Type: dhcp-ack

 

ClientHardAddress: 0010-dc19-695d

 

         your ip address: 10.1.1.1

 

 
*0.7200580-DHCP-8-largehop:

 

Discard DHCP request packet because of too large hop count!

 

 
*0.7200725-DHCP-8-invalidpkt:

 

Wrong DHCP packet! 

dhcp relay security ip-address mac-address static

undo dhcp relay security ip-address

System view, VLAN interface view

ip-address: IP address the user uses.

mac-address: MAC address the user owns.

static: Specifies the user address entry is static.

Use the dhcp relay security command to add a user address entry for the DHCP 
server.

Use the undo dhcp relay security command to remove a user address entry 
configured for the DHCP server.

Before adding/removing a user address entry, you can check user address entries 
configured for the DHCP server using the display dhcprelay-security command.

# Configure a user address entry for a DHCP server, with an IP address of 1.1.1.1 
and a MAC address of 0005-5D02-F2B3.

<SW8800> system-view

 

System View: return to User View with Ctrl+Z. 

 

[SW8800] dhcp relay security 1.1.1.1 0005-5D02-F2B3 static 

Table 110   Description on the fields of the debugging dhcp-relay command

Interface 

The VLAN interface that forwards DHCP packets 

Type 

Type of the forwarded DHCP packet 

ClientHardAddress  The MAC address of the DHCP client 

ServerIpAddress 

The IP address of the DHCP server 

your ip address 

The IP address assigned to the DHCP client