3com S7906E Reference Guide

 

1-19 

Any view 

1: Monitor level 

interface interface-type interface-number: Specifies a port by its type and number. 

Use the display cfd mp command to display the MP information. 

If no port is specified, this command will display the MP information of all ports. 

The information displayed is ordered by port name primarily, and within a single port, ordered by VLAN 

ID (from small to big), and within a single VLAN, in the order of outward-facing MEPs (from low to high 

level), MIPs, and inward-facing MEPs (from high to low level). 

# Display the MP information. 

<Sysname> display cfd mp 

Interface GigabitEthernet2/0/2   VLAN 100 

MEP ID: 100      Level: 0    Service instance: 100    Direction: Outbound 

Maintenance domain: mdtest0 

Maintenance association: mainmd0 

 

MEP ID: 105      Level: 5    Service instance: 105    Direction: Outbound 

Maintenance domain: mdtest5 

Maintenance association: mainmd5         

 

MIP              Level: 6    Service instance: 106 

Maintenance domain: mdtest6 

Maintenance association: mainmd6 

 

MEP ID: 104      Level: 4    Service instance: 104    Direction: Inbound 

Maintenance domain: mdtest4 

Maintenance association: mainmd4 

 

MEP ID: 102      Level: 2    Service instance: 102    Direction: Inbound 

Maintenance domain: mdtest2 

Maintenance association: mainmd2 

 

Interface GigabitEthernet2/0/4   VLAN 1 

MEP ID: 9        Level: 6    Service instance: 6      Direction: Outbound 

Maintenance domain: mdtest6 

Maintenance association: matest6