Xerox C55 Supplementary Manual

W  I  N  D  O  W  S     24

Windows NT 4.0 Network

Your printer can be installed on a Windows NT network using one of
three methods:

•

 TCP/IP protocol

•

 DLC/LLC protocol

•

 AppleTalk protocol

The Preliminary Steps given below must be accomplished for all
printers regardless of the protocol that is being used. Then, the Quick
Install Steps will detail the installation based on the protocol used on
your network.

1. Install the Network Interface Card in the printer (if not already

installed).  Details are in this document in the section entitled
Installation of the Network Interface Card.

2. Connect appropriate cabling from printer to network. Details are

in this document in the section entitled Network Cable
Connection.

3. Print the Print Settings page.  Details are in this document in the

section entitled Print The Print Settings Page.  Retain this page
for reference.

4. Check the Print Settings page and verify that both the desired

protocol and connector are enabled.

5. Proceed to the Quick Install Steps for your network protocol.