Gestetner 3245e Operating Guide

Settings You can Change with the User Tools

23

09. Energy Saver Mode

The machine enters Energy Saver mode in the following 
cases:

• If you hold down the {

} key for 

about a second or more.

• When the preset time selected with the Low Power Tim-

er has passed.

See “08. Low Paper Timer” in 

”.

In Energy Saver mode, power consumption is saved as 
shown below, as compared with Stand-by mode.

• Level 1 (default): Saving about 20%

• Level 2: Saving about 25%

Warm-up time required for Energy Saver mode to return to 
the ready condition is as follows:

• Level 1 (default): About 3 seconds

• Level 2: About 10 seconds

❒ Default: Level 1
❒ The values above are references applicable to Type 1 

(mainframe only).

10. Auto Off Timer

The machine turns itself off automatically to conserve ener-
gy after your job is finished, after the selected time. This 
function is called “Auto Off ”. The time can be set from 1 to 
240 minutes.

❒ Default: 60 minutes
❒ Auto Off might not be effective when the machine is in 

the following conditions:

• An error message is displayed.

• The remaining memory space for facsimile or scan-

ner mode is less than 100%.

❒ To return to the ready condition from Auto Off, the ma-

chine requires the same warm-up time as the time for be-
coming ready after its power is turned on.

❒ When the machine receives a fax or printer data in Auto 

Off mode, it automatically prints the fax or the printer 
data.