GE scb2000f Specification Guide
SCB2000F – Advantium
™
Wall Oven
Dimensions (in inches)
TM
R
Listed by
Underwriters
Laboratories
Underwriters
Laboratories
For answers to your Monogram,
®
GE Profile
™
or
GE appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center
GEAppliances.com or call
GE Answer Center
®
service, 800.626.2000.
Specification Revised 11/03
240428
Most 30" Wall Cabinets can be used with this unit.
Cutout width
28-1/2
30
Required
cutout location
36-3/4"
minimum
from floor
Junction
box
location
A=Allow 1" overlap of oven over top and bottom edges of cutout.
B=Allow 11/16"-3/4" for overlap of oven over side edges of cutout.
B=Allow 11/16"-3/4" for overlap of oven over side edges of cutout.
4-3/16
21
Cutout height
A
B
19
Cutout depth
29-25/32
21-7/8
15-27/32
Excluding
Handle
Construct Solid
Bottom Min.
3/8" Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides.
(Must Support
150 lbs.)
Bottom Min.
3/8" Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides.
(Must Support
150 lbs.)
Note: Cabinets installed adjacent to wall ovens must have an adhesion
spec of at least 194°F temperature rating.
spec of at least 194°F temperature rating.
Note: 2" minimum between cutouts when installed above warming
drawer or single wall oven.
drawer or single wall oven.