GE jt980skss Specification Guide
R
Listed by
Underwriters
Laboratories
Dimensions and Installation Information
Note: Cabinets installed adjacent to wall ovens must have an adhesion
spec of at least a 194°F temperature rating.
spec of at least a 194°F temperature rating.
Electric wall ovens are not
approved for installation with a plug and receptacle. They must be
hard wired in accordance with installation instructions. Suitable oven
cabinet bracing must support 275 lbs.
Installation Information: Before installing, consult installation instructions
packed with product for current dimensional data.
Installation Information: Before installing, consult installation instructions
packed with product for current dimensional data.
KW Rating
240V
8.9
208V 6.7
Breaker Size
240V
40 Amps
208V 40 Amps
For answers to your Monogram,
®
GE Profile
™
or
GE
®
appliance questions, visit our website at
ge.com or call GE Answer Center
®
service,
800.626.2000.
Dimension and installation information are shown in inches.
CL
Suitable
bracing
to support
runners
18
Over centerline
of cabinet
2 x 4 or
equivalent
runners
21" minimum
Door Opening
Allowance
B
B
A
A
Cutout height
51-13/16" MIN.
51-15/16" MAX.
51-13/16" MIN.
51-15/16" MAX.
Minimum cutout
location 2" from
the floor.
Cutout
depth
23-1/2"
MIN
5
47" to
bottom of
junction
box
Cutout width
28-1/2'' MIN.
28-5/8'' MAX.
21
Cabinet
width 30"
C
E
D
MOST 30'' WALL CABINETS CAN BE USED WITH THIS UNIT.
THE OPENING BETWEEN THE INSIDE WALLS MUST BE AT LEAST 28-1/2'' WIDE.
Conduit
(48-1/2"
long)
Junction
box
location
Bottom of
Cutout
DWO
jt980_install_ii.eps
32
25
7
Acceptable
junction box
location area
DWO
junction box
location area
DWO
Cabinet
30"
A - Overlap of Oven Over Side Edges of Cutout
11/16"-3/4"
B - Overlap of Oven at Bottom of Cutout
1"
Oven
C - Overall Depth
23-1/2"
D - Overall Height
52-7/8"
E - Overall Width
29-3/4"
Specification Created 1/05
220603
JT980SK
GE Profile
™
30" Built-In Double Oven with Trivection
™
Technology