GE jk915 Specification Guide
Dimension and installation information are shown in inches.
For answers to your Monogram,
®
GE Profile
™
or
GE
®
appliance questions, visit our website at
ge.com or call GE Answer Center
®
service,
800.626.2000.
Dimensions and Installation Information
JK915BF/CF/WF
GE Profile
™
27" Built-In Single Oven
R
Listed by
Underwriters
Laboratories
Specification Revised 1/05
220354
KW Rating
240V
3.4
208V 2.6
Breaker Size
240V
20 Amps
208V 20 Amps
Note: These ovens are not
approved for stackable or
side-by-side installations.
These ovens can be installed
side-by-side with no less
than 30” distance between
center-to-center of each oven.
Note: Cabinets installed adjacent to wall ovens must have an adhesion spec
of at least a 194°F temperature rating. For 27” built-in single ovens, if marks,
blemishes or the cutout opening is visible above the installed oven, it may
be necessary to add wood shims under the runners and front trim until
the marks or openings are covered.
Note: Cabinets installed adjacent to wall ovens must have an adhesion spec
of at least a 194°F temperature rating. For 27” built-in single ovens, if marks,
blemishes or the cutout opening is visible above the installed oven, it may
be necessary to add wood shims under the runners and front trim until
the marks or openings are covered.
Electric wall ovens are not approved
for installation with a plug and receptacle. They must be hard wired in
accordance with installation instructions.
Installation Information: Before installing, consult installation instructions
packed with product for current dimensional data.
Installation Information: Before installing, consult installation instructions
packed with product for current dimensional data.
CL
(Must Support 275 LBS.)
2 x 4 or
equivalent
runners
Suitable
bracing
to support
runners
18"
over centerline
of cabinet
2" x 4"
or equiv.
runners
B MIN.
C MIN.
Conduit 48-1/2" long
6015 Built-in Single Oven
(Pub. 1-G003 pg. 107) April 28, 1993
32-1/2
D
10
A
Allow 3/4"
for overlap
over all edges
of cutout
Locate
junction
box
either
5" MIN.
below
cutout
floor or
34" MIN.
above
cutout
floor
Minimum
cutout
location
from
floor
(Minimum 15-5/8"
from floor when
installed below built-in
microwave oven)
E
G
F
20
Cabinet
27"
A - Cabinet Width Required
27" min.
B - Minimum Cabinet Depth
23-5/8"
C - Opening Width
25" min. - 25-1/4"
D - Opening Height
27-5/8" min. - 28-1/8" max.
Oven
E - Overall Depth
E - Overall Depth
23-5/8"
w/o trim
28-1/4"
F - Overall Height with trim
29"
G - Overall Width
26-5/8"