Lexmark Optra T Installation Instruction
Install Memory and Optional Cards
15
Step 2: Install Memory and
Optional Cards
Accessing the Printer System Board
You must access the printer system board to install
printer memory, flash memory, or an optional card.
printer memory, flash memory, or an optional card.
1
Make sure the printer power is off, the
printer power cord is unplugged, and all
cables are disconnected from the back of
the printer.
printer power cord is unplugged, and all
cables are disconnected from the back of
the printer.
2
Press the release latches to open the upper
and lower front doors.
and lower front doors.
3
Press down on the side door latches and
open the side door.
open the side door.
4
Loosen, but do not remove, the six screws
as shown.
as shown.
Screws