Lexmark Optra T User Guide
53
Using the Operator Panel and Menus
Alarm Control
Off
Single*
Continuous
Single*
Continuous
Select
Single
or
Continuous
if you want the alarm to sound any time the printer requires intervention.
Select
Off
if you do not want the alarm to sound.
Toner Alarm
Off*
Single
Continuous
Single
Continuous
The
Toner Alarm
setting lets you set the printer to stop printing when a toner low condition occurs.
If you select
Single
or
Continuous
, the printer stops printing, displays
88 Toner Low
, and sounds the alarm.
If you select
Off
, the printer displays
Toner Low
and continues printing.
Job Buffer Size
Disabled*
10 ... 100
10 ... 100
Job buffering lets you delay processing of a print job. The job is temporarily stored on an optional hard disk before being
printed. This usually frees the host computer during the actual printing of a print job.
printed. This usually frees the host computer during the actual printing of a print job.
The
Job Buffer Size
menu item lets you select the amount of hard disk space allocated to job buffering for all ports that have
job buffering set On.
The
Job Buffer Size
menu item does not display if the installed option is defective or is Read/Write or Write protected.
61 Defective Disk
displays during printer power on. See
Job Buffer Size
can be set to
Disabled
or from
10
% to
100
% in 1% increments. The first displayed size is
10
%. When the job
buffer size is changed and saved, the hard disk is reformatted and current hard disk contents are deleted.
Setup Menu (continued)
Menu item
Values
*Factory default