Blaupunkt CASABLANCA CD52 Operating Guide

11

Switching to radio mode

If you are in CD, CD changer/Compact
Drive MP3 or AUX mode,

➮

press the FM TS button 

5

 for FM

radio mode.

➮

press the AM button 

?

 for AM ra-

dio mode.

Switching the RDS function on/
off

➮

To use the RDS functions, press
the RDS button 

4

.

The RDS function is active when RDS
lights up in the display with a symbol.

Selecting the waveband /
memory bank

This unit can receive programmes
broadcast over the FM and AM wave-
bands. There are three memory banks
(FM1, FM2 and FMT) for the FM wave-
band and two memory banks (AM and
AMT) for the AM waveband.

Six stations can be stored in each mem-
ory bank.

To  switch between the FM memory
banks,

➮

briefly press the FM TS button 

5

repeatedly until the required mem-
ory bank appears in the display.

To  switch between the AM memory
banks,

➮

briefly press the AM button 

?

 re-

peatedly until the required memory
bank appears in the display.

Tuning into a station

There are various ways of tuning into a
station.

Automatic seek tuning

➮

Press the   or   button 

:

.

The unit tunes into the next receivable
station.

Tuning into stations manually

You can also tune into stations manual-
ly.

➮

Press the    or   button 

:

.

Note:
You can only tune into stations manual-
ly on the FM waveband if the RDS and
PTY functions are deactivated.

Setting the sensitivity of station
seek tuning

You can choose whether to only tune
into stations with a strong reception or
to also tune into those with a weak re-
ception.

➮

Press the MENU button 

8

.

➮

Keep pressing the   button 

:

 un-

til “SENS” appears in the display.

➮

Press the   button 

:

.

The display shows the currently set sen-
sitivity level. “SENS 6” means that the
tuner is set to the highest sensitivity
setting. “SENS 1” is the lowest setting.

➮

Set the required sensitivity using
the    or   button 

:

.