Blaupunkt HEIDELBERG CD51 Operating Guide
12
Storing stations automatically
(Travelstore)
(Travelstore)
You can store the six stations with the
strongest reception in the region auto-
matically (only FM). The stations are
stored in the FMT memory.
strongest reception in the region auto-
matically (only FM). The stations are
stored in the FMT memory.
Note:
Stations that were previously stored in
this memory are deleted in the process.
Stations that were previously stored in
this memory are deleted in the process.
➮
Hold down the FM / TS button
5
for more than two seconds.
The automatic station-storing procedure
begins. “TRAVEL-STORE” appears on
the display. Once the process is com-
pleted, the station stored in FMT mem-
ory location 1 is played.
begins. “TRAVEL-STORE” appears on
the display. Once the process is com-
pleted, the station stored in FMT mem-
ory location 1 is played.
Listening to preset stations
➮
Select the memory or frequency
range.
range.
➮
Hold down the preset station button
1 - 6
1 - 6
>
of the desired station.
Scanning receivable stations
(SCAN)
(SCAN)
You can briefly listen in to all receivable
stations. The scanning time can be set
in the menu at between 5 and 30 sec-
onds.
stations. The scanning time can be set
in the menu at between 5 and 30 sec-
onds.
Starting SCAN
➮
Hold down the OK button
;
for
more than two seconds.
The scanning process begins. “SCAN”
appears briefly on the display, followed
by the current station name or frequen-
cy, which flash.
appears briefly on the display, followed
by the current station name or frequen-
cy, which flash.
Ending SCAN, continuing to listen
to a station
to a station
➮
Press the OK button
;
.
The scanning process is completed, the
station last scanned remains active.
station last scanned remains active.
Setting the scanning time
➮
Press the MENU button
8
.
➮
Press the button
:
repeatedly
until “SCANTIME” appears on the
display.
display.
➮
Use the buttons
:
to set the
desired scanning time.
➮
Once the setting has been com-
pleted, press the MENU button
pleted, press the MENU button
8
or OK
;
.
Note:
The set scanning time also applies to
scanning in the CD and CD changer
mode.
The set scanning time also applies to
scanning in the CD and CD changer
mode.
Optimising radio reception
High-frequency cut-off feature
(HICUT)
(HICUT)
The HiCut function improves the sound
during poor radio reception (only FM).
If interference occurs, the treble is au-
tomatically reduced and thus also the
interference level.
during poor radio reception (only FM).
If interference occurs, the treble is au-
tomatically reduced and thus also the
interference level.
Switching HiCut on/off
➮
Press the MENU button
8
.
➮
Press the button
:
repeatedly
until “HICUT” appears on the dis-
play.
play.
➮
Use the or button
:
to select
HICUT.
RADIO MODE