Samsung Galaxy S User Guide

Page of 144
Settings
115
Location and security
Change the settings for securing your device and the SIM 
or USIM card, and GPS functionality.
Use wireless networks
: Set to use WLAN and/or mobile 
networks for finding your location.
Use GPS satellites
: Set to use the GPS satellite for 
finding your location. You can view locations at street 
level.
Use sensor aiding
: Set to use sensors to enhance 
pedestrian positioning when the GPS signal is 
obstructed. There may be variations between the sensor 
estimates and your actual location.
Set screen lock
: Set the unlock security code. When 
you have set your security code, this option changes to 
Change screen lock.
None
 -
: Disable the screen lock.
Pattern
 -
: Set an unlock pattern to unlock the screen.
Horizontal calibration
: Calibrate the geomagnetic 
sensor when the compass or augment reality application 
shows incorrect information.
Keep the touch screen or keypad facing up during 
calibration.
Calibration may take some time, depending on 
your location or other circumstances.
Calibration may not be possible in areas with 
strong magnetic fields. If the calibration fails, move 
to another area and try again.
If you enter an area with strong magnetic fields 
after calibration, your device will automatically 
attempt to recalibrate the geomagnetic sensor.
The geomagnetic sensor in your device does 
not support the bird’s-eye view, which fixes the 
directions. Therefore, a small error may occur in 
measuring angles and cause a map to be turned 
upside-down.