Omnitron iConverter Tx/2Fx 8421-1 Leaflet
Product codes
8421-1
iConverter
iConverter
®
The
■
iConverter Redundant Fast Ethernet modules
provide hot backup, 100 microseconds link redundancy
for critical applications
Tx/2Fx model provides 100BASE-TX UTP to two
■
100BASE-FX fiber links
Tx/2Tx models provide 100BASE-TX UTP to two
■
100BASE-TX UTP copper links
Fiber modules support multimode, single-mode, and
■
single-fiber with ST, SC, LC and MT-RJ connectors
Auto-negotiation or forced Half/Full-Duplex and
■
crossover switches on all UTP ports
User-selectable link fault detection modes facilitate
■
quick fault detection, isolation and reporting
Management is available with the addition of a
■
management module to the chassis
SNMP management via
■
NetOutlook
®
provides real-
time port and module information, remote parameter
configuration and trap notification
Modules are hot-swappable in 19-Module, 5-Module,
■
2-Module or 1-Module chassis
Lifetime Warranty and free 24/7 Technical Support
■
iConverter
Tx/2Fx and Tx/2Tx
Redundant Fast Ethernet Fiber & UTP Managed Ethernet Media Converters
The iConverter Redundant Fast Ethernet managed media
converters are members of the modular iConverter product
family, and include:
Tx/2Tx - 100BASE-TX UTP to dual 100BASE-TX UTP
■
Tx/2Fx - 100BASE-TX UTP to dual 100BASE-FX dual fiber
■
Tx/2Fx SF - 100BASE-TX UTP to dual 100BASE-FX single-fiber
■
The iConverter Redundant Fast Ethernet modules are designed
The iConverter Redundant Fast Ethernet modules are designed
for use in networks that require fiber or copper link redundancy.
With a link fault detection time of 100 microseconds, the
Redundant iConverter modules provide the rapid response time
required for mission-critical applications.
All ports support Half or Full-Duplex operation, and the UTP
All ports support Half or Full-Duplex operation, and the UTP
ports can auto-negotiate or be manually set to a required duplex
mode. The fiber ports are always set to manual mode. All ports
in an application must be set to the same duplex mode.
All ports support Link Propagation (Link Loss Carry Forward),
All ports support Link Propagation (Link Loss Carry Forward),
Link Segmentation, Remote Fault Detection and Symmetrical
Fault Detection modes to facilitate quick fault detection, isolation
and reporting.
iConverter Redundant Fast Ethernet modules are hot-swappable
iConverter Redundant Fast Ethernet modules are hot-swappable
and can be mounted in a 19-Module (2U high) or 5-Module
(1U high) rack-mountable chassis (19-inch or 23-inch) with
any combination of redundant AC, 24VDC or 48VDC power
supplies. They can also be mounted in a 2-Module AC or 18
to 60VDC powered chassis, or in a 1-Module AC/DC powered
chassis.
The iConverter Multi-Service Platform consists of Network
Interface Devices, T1/E1 multiplexers, CWDM multiplexers
and managed media converters that combine to deliver
Carrier Ethernet and TDM services over fiber or CWDM
wavelengths. This flexible architecture supports a wide variety
of configurations for scalable and reliable fiber connectivity in
Service Provider and Enterprise networks.
Key Features