TOA pe-304 Installation Instruction

• Before installation or use, be sure to carefully read all

the instructions in this section for correct and safe
operation.

• Be sure to follow all the precautionary instructions in

this section, which contain important warnings and/or
cautions regarding safety.

• After reading, keep this manual handy for future

reference.

• Install the unit only in a location that can structurally

support the weight of the unit and the mounting bracket.
Doing otherwise may result in the unit falling down and
causing personal injury and/or property damage.

• Do not use other methods than specified to mount the

bracket. Extreme force is applied to the unit and the unit
could fall off, possibly resulting in personal injuries.

• Tighten all screws securely. If any is loosely fixed, this

may cause the unit to fall, resulting in personal injury.

• To avoid electric shocks, be sure to switch off the

amplifier's power when connecting speakers.

• Do not operate the unit for an extended period of time

with the sound distorting. This is an indication of a
malfunction, which in turn can cause heat to generate
and result in a fire.

• Do not hang down from the unit as this may cause it to

fall down or drop, resulting in personal injury and/or
property damage. 

The PE-304 pendant speakers are designed
for ceiling suspension installations.
Considered in architectural design, they can blend in with
lighting equipment.
A directly-attached 5 m (16.4 ft) speaker cord allows the
speaker to be suspended from the high ceiling.

The PE-64 is driven on high-impedance (100 V and 70 V)

The PE-304 is driven on both high-impedance
(100 V and 70 V) and low-impedance (8 Ω) lines.
The input power (impedance) can be easily changed at
the upper side of the speaker.
The speakers are easy to repaint so as to meet a wide
range of design needs. 

Note: The design and specifications are subject to change without notice for improvement. 

PE-64

PE-304

Bass-reflex type

6 W (100 V line), 3 W (70 V line)

30 W (100 V, 70 V line, 8 Ω)

–

8 Ω

1.7 kΩ (6 W), 3.3 kΩ (3 W), 10 kΩ (1 W)

330 Ω (30 W), 500 Ω (20 W), 670 Ω (15 W), 1 kΩ (10 W), 2 kΩ (5 W)

1.7 kΩ (3 W), 3.3 kΩ (1.5 W), 10 kΩ (0.5 W)

170 Ω (30 W), 250 Ω (20 W), 330 Ω (15 W), 500 Ω (10 W), 1 kΩ (5 W)

90 dB (1 W, 1 m)

91 dB (1 W, 1 m) 

100 – 18,000 Hz (at 20 dB below peak)

70 – 20,000 Hz (at 20 dB below peak)

12 cm (5") cone type

12 cm (5") cone type + balanced dome-tweeter

2-core cabtyre cord 5 m (16.4 ft)

600 V vinyl-insulated cable (IV wire or HIV wire)
Solid wire: ø0.8 – ø1.6 mm (equivalent to AWG 20 – 14)
7-core twisted wire: 0.75 – 1.25 mm

2

(equivalent to AWG 18 – 16)

Push-in connector (bridging terminal of 2 branch type)

Enclosure: HIPS resin, off white (RAL 9010 or equivalent color)
Grille:

Surface-treated steel plate net, off white (RAL 9010 or equivalent color), paint

ø186 x 251 (h) mm  (ø7.32" x 9.88")

1.5 kg (3.31 lb)

2.1 kg (4.63 lb) 

Ceiling bracket ...... 1,   Mounting hanger ...... 1,   Ceiling cover ...... 1,   Tapping screw 4 x 16 ...... 4

Model No.
Enclosure
Rated Input

Rated

Low

Impedance

100 V line

70 V line

Sensitivity 
(500 – 5,000 Hz, pink noise)
Frequency Response
Speaker Component
Speaker Cord
Application Cable

Connection
Finish

Dimensions (unit only)
Weight (unit only)
Accessories

Thank you for purchasing TOA's Pendant Speakers. 
Please carefully follow the instructions in this manual to
ensure long, trouble-free use of your equipment.

Indicates a potentially hazardous situation which, if
mishandled, could result in death or serious
personal injury.

Indicates a potentially hazardous situation which, if
mishandled, could result in moderate or minor
personal injury, and/or property damage.