Epson RX680 Quick Reference Card
18
Printing From a Memory Card, Camera, or Other Device
Inserting the Card
1. Make sure your RX680 Series is turned on.
Note:
If you see a message on your computer screen when you insert a card, cancel the
operation and close the message window.
If you see a message on your computer screen when you insert a card, cancel the
operation and close the message window.
2. Open the memory card door.
3. Insert your card into the correct slot (see page 17); it won’t go in all the way.
The memory card access light flashes, then stays on.
When you want to remove the card, make sure the memory card access light is not
flashing, then pull the card straight out of its slot.
flashing, then pull the card straight out of its slot.
Caution:
Do not remove the card or turn off the RX680 Series while the memory card access
light is flashing; you may lose data on the card.
Do not remove the card or turn off the RX680 Series while the memory card access
light is flashing; you may lose data on the card.
Top slot
Bottom slot
sprx680_qg.book Page 18 Wednesday, June 6, 2007 8:40 AM