Epson 3250 Product Datasheet

ActionPrinter 3250

l

You can adjust the top-of-form position temporarily. Open the
printer cover and turn the gear marked by + and - signs to
adjust the position This adjustment is lost when you turn off the

printer or feed the paper backward to the paper-park position by
pressing the FORM 

FEED and FONT buttons at the same time.

l

If you want to change the top-of-form position permanently,

adjust it with the default-setting mode.

l

Each time you turn on the printer with paper loaded, it reverses
the continuous paper to the paper-park position and then

advances it to the next top-of-form. Always remove your printed
sheets before you turn off the printer to keep the top-of-form

position accurate.

1. Tear off any printed pages. Press the 

buttons at the same time to feed the remaining paper backward

to the paper-park position Remove the paper from the push

tractor.

Always tear off the printed document and

excess paper before feeding paper backward. Never feed

more than one page backward through the printer.

2. Turn off the printer.

3. Lower the paper-release lever to the single sheet position. Then

pull the push tractor straight down and out of the printer.

paper guide.

When you use the push tractor, you can easily switch to single-sheet
printing without removing the continuous paper supply.

Here’s how to switch from continuous paper to single sheets:

1. If you have a printed document stilI in the printer, tear off the

printed pages and then press the FORM FEED and FONT buttons at
the same time to reverse the remaining paper back to the paper-

park position.

l

Always tear off printed pages before feeding paper

backward; feeding too many sheets backward can

cause a paper jam.

l

Never feed labels backward. They can easily peel off of

their backing and jam the printer.

2. Lower the paper-release lever to the single-sheet position.