Epson dfx-8000 Product Datasheet
DFX-8000 DOT-MATRIX PRINTER
Character fonts:
Font
Available
inch)
power cable
connector
lock
Printer Specifications
Printing
Printing method:
9-pin impact dot matrix
Pin
configuration:
Two 9-pin columns
Printing speed:
high-speed
12
10
12
192
Printing direction:
Line spacing:
Bidirectional logic-seeking for tat printing.
Unidirectional for graphics (can also be
switched to bidirectional using the proper
software command).
Unidirectional for graphics (can also be
switched to bidirectional using the proper
software command).
or
in
increments of
of an inch
Paper feed speed:
Printable columns:
Approx. 17 ms/line at l/&inch line spacing
during continuous feeding
during continuous feeding
26
ms/line at
line spacing during
characters:
Paper
Paper type:
Standard
ASCII
character set
with
96 characters
(including italic characters)
13 international character sets
(including italic characters)
Epson Extended Graphics character set
(including italic characters)
Epson Extended Graphics character set
Continuous-feed paper:
l
The sprocket
holes
must be perfectly
circular or circular and notched.
l
The holes must be cleanly cut.
l
The perforation between pages should
not
extend all
the
way to the edges of
the
paper, as shown below.
Paper weight:
Continuous paper: 14 to 22 Ibs.
(52.6 to 82.7
Multi-part
to 15
to
Paper thickness:
Continuous paper (including multi-part
forms):
forms):
Front up to 0.46 mm
Rear up to 0.30 mm
Rear up to 0.30 mm
Up to 0.19 mm (0.0075’) including backing
sheet
Overlapping area on overlapping
sheet
Overlapping area on overlapping
up to 0.70 mm (0.028’)
Input buffer:
3Kbyte
9-Pin Printers
5 / 2 3 / 9 0
DFX-8000-1