Epson 1520 Quick Setup Guide
Quick Setup
6
1. Make sure the paper release lever is set to the single sheet position (the m single sheet icon
appears beneath the lever handle.
2. Lock the output tray in an upright position on the two upper posts.
3. Slide the right edge guide all the way left until it stops. Then slide the left edge guide to
match the approximate width of your paper.
4. Move the center support midway between the two edge guides.
Single sheet icon
Slide this
guide left
guide left
Slide this guide
to paper’s width
to paper’s width
Move the
center support
midway
center support
midway