Epson 800N Installation Guide

1. Create a folder for EPSON Net! on your hard drive.

2. Insert the EPSON Net! for Macintosh installation diskette.

3. Copy the program from the disk to the folder.

After you install EPSON Net!, you use it to configure your 
printer for AppleTalk. See page 22 for instructions.

With NetWare, you can configure the printer as a print server, 
remote printer, or have it switch automatically between these 
two modes, depending on network conditions. Before you 
configure the printer, check the following:

◗

Make sure Novell NetWare is set up to use print services on 
your network. See your NetWare documentation for 
details.

◗

Decide whether you want to use the printer as a dedicated 
print server or as a remote printer, or whether you want to 
switch automatically between these two modes.

◗

Make sure Bindery Emulation is selected. In PCONSOLE, 
press 

F4

 to switch between Bindery Emulation and 

Directory Services.

If you want to use your EPSON Stylus COLOR 800N as a 
remote printer, you must use PCONSOLE to define it on a 
NetWare print server. You then use EPSON Net! for NetWare 
to configure the operating mode and make other configuration 
changes.

Note:
If you want to use your 
printer as a dedicated 
print server, skip to 
“Using EPSON Net! for 
NetWare Windows” on 
page 12.

QuikSet2.fm  Page 10  Wednesday, October 15, 1997  3:49 PM