Epson 875DCS User Guide

Remove the paper and check that it: 

■

Isn’t curled or creased

■

Isn’t too old

■

Isn’t loaded above the arrow on 
the left edge guide

■

Isn’t jammed inside the printer. 
(If the 

 

S paper out light is 

flashing, paper is jammed.)

Reload the paper and don’t set the 
left edge guide too tightly.

Make sure the 

Copies

 settings 

in the printer software and your 
application aren’t both set for 
multiple copies.

■

If the paper doesn’t eject fully, you 
may have set the wrong paper size. 
Press the 

 

E load/eject button to 

eject the paper. Then select the 
correct paper size in your 
application or printer software.

■

If it’s wrinkled when it ejects, the 
paper may be damp or too thin.

■

If you’re ejecting roll paper, 
carefully follow the steps in 
“Removing and Storing Roll 
Paper” on page 21.

If you’re loading roll paper, carefully 
follow the steps on page 19.

Press the 

 

E load/eject button, turn 

off your printer, open the cover, and 
remove all the paper that’s inside, 
including any small pieces that may 
have torn off. 

If your paper jams frequently:

■

Use smooth, high-quality paper, 
loaded printable side up.

■

Fan the stack and then even the 
edges before loading it.

■

Don’t load paper above the arrow 
mark on the left edge guide.

■

Place the paper against the right 
edge guide and slide the left edge 
guide against your paper.

Remove the paper, then:

■

Make sure the paper isn’t too thin. 

■

Fan the edges of the stack of paper 
to separate the sheets, then reload 
the paper as described on page 6.

■

Make sure the edge guides fit 
against the paper, but not too 
tightly.