Epson 1810P Product Datasheet

PowerLite 1810p/1815p

22 

- 

PowerLite 1810p/1815p

3/07

Note: To monitor a projector when it’s in standby mode (plugged in 
but not turned on), you must select Network On as the Standby Mode 
setting in the projector’s Extended menu.

The projector is powered on and its status 
is normal.

The projector is powered off and its status 
is normal.

The projector is powered on and its status 
is abnormal.

The projector is powered off and its status 
is abnormal.

The projector’s internal temperature is 
normal (low).

The projector’s internal temperature is 
normal (medium).

The projector’s internal temperature is 
normal (high).

The projector’s internal temperature is high 
(high-temperature warning).

The projector’s internal temperature is too 
high (internal temperature error). The 
projector is turned off automatically.

Lamp life warning. The lamp is nearing the 
end of its life.

High-temperature warning. The projector is 
getting too hot but continues to operate.

Replace air filter.

No air filter. The air filter is not installed or 
installed incorrectly.

Low air flow. The air filter needs to be 
cleaned or replaced.

Air flow sensor error. There is a problem 
with the projector’s air flow sensor; contact 
Epson for help.

Lamp cover door open. Close the lamp 
cover door.

Lamp out. The lamp has reached the end of 
its life.

Lamp failure at power on. The lamp has 
reached its end of life or is installed 
incorrectly.

High internal temperature error. The 
projector is turned off automatically.

Internal (system) error. Contact Epson for 
help.

Fan error. Contact Epson for help. 

Sensor error. Contact Epson for help.

Other error. Contact Epson for help.