One For All urc-1030 Reference Guide

Find your TV
brand on the
reverse side
of these

instructions.  The most
popular codes are listed first.
Write your codes here:

Thank you for purchasing the
One For All

 1 Device universal

remote control.  Before you can
use your new remote control,
you will need to program it.
To do this, you need to tell the
remote control what TV set
you wish to operate.  This is
done by following these easy
steps.

Step 1:

Install two (2) new AAA
batteries.

Step 2:

Find the code for your
TV on the reverse side of
these instructions.

Step 3:

Enter the code.

Step 4:

Use your remote.

Power
Key

Red Light
(LED)

Channel
& Volume
Keys

Mute
Key

Your One For All 

 1 Device needs

two (2) new AAA alkaline batteries.
To install the batteries:

On the back of
the One For All 

1 Device , unscrew
and push down on
the tab and lift the
cover off.

Test the unit by
pressing POWER.
The red light
should blink.

Even if your batteries die, the One For

 1 Device built in memory back-up

codes. The One For All

 1 Device will

Press the battery
cover back into
place and replace
the screw.

Match the
batteries to the +
and - marks inside
the battery case,
then insert the
batteries.

RCA

3124

Sony

1111

Look at your TV to find
the brand name and write
it in the space below:

_____________________

You will need one of these codes
to program your One For All 

Device remote control.

Turn on your TV.

Press and hold SETUP until the One For All

  1 Device's red light

blinks twice.  Release SETUP.

Using the example
shown on the right,
enter the first four-digit
code you wrote down.
(See "Looking Up Your
TV Code".)  If you put
in the code correctly,
the red light will blink
twice.

How to Enter Codes

If your TV   Press
code is:

VOL

1

CH

_

4

Aim the One For All

 1 Device at your TV and press POWER.

Your TV should turn off.  If it doesn't, repeat Steps 2-4, trying
each code listed for your brand until you find the one that operates
your  TV.

Setup
Key

CH+

3

VOL

2