Lexmark e220 Installation Guide
34
Verify printer setup
Step 8: Verify printer setup
Turning on
the printer
the printer
1
Plug one end of the printer cord into the power cord connector
at the back of the printer and the other end into a properly
grounded outlet.
at the back of the printer and the other end into a properly
grounded outlet.
2
Turn on the printer.
All indicator lights cycle (each light blinks, from top to bottom,
and then cycles again).
and then cycles again).
Printing a
setup page
setup page
Print a menu settings page for a list of current printer settings:
1
Press and release Continue
to print the page.
2
On the menu settings page:
•
Verify that the options you installed are correctly listed under
“Installed Features.”
“Installed Features.”
If an option you installed is not listed on the menu settings
page, turn the printer off, unplug the power cord, and
reinstall the option.
page, turn the printer off, unplug the power cord, and
reinstall the option.
•
Verify that the amount of memory installed is correctly listed
under “Printer Information.” Verify that the paper trays are
configured for the sizes and types of paper you loaded.
under “Printer Information.” Verify that the paper trays are
configured for the sizes and types of paper you loaded.