Lexmark c510 Quick Reference Card

Press Menu to:

Enter the menus from the 

 state.

Scroll through menus or values.

Increase or decrease a numerical value.

Display the 

 while the printer is busy.

Press Select to:

Select the item on the second line of the display.

Save the selection as a new default setting.

Press Return to return to the previous menu level.

Press Go to:

Exit printer menus and return to the 

 state.

Clear messages.

Press Stop to temporarily stop all print activity without losing data.

This quick reference information is also included, in a printable format, on the 
publications CD that shipped with your printer.

If you want to print a job that is personal or confidential, and you do not want 
anyone else to see it, the printer can hold your job in memory until you arrive at the 
printer.

This only works with custom printer drivers. These drivers are located on the 
drivers CD that shipped with your printer.

To print a confidential job:

In your word processor, spreadsheet, browser, or other application, select
File   Print.

Click Properties (or Options, Printer, or Setup, depending on the 
application) to view the printer driver settings. 

Click Help and refer to the topic “Confidential print” or “Print and hold.” Follow 
the instructions. 

If you send a large file to a shared network printer, it remains in the printer 
memory until you print it. This could prevent others from printing. Retrieve 
your print jobs as soon as possible. To check the amount of memory in your 
printer, see 

.

Go to the printer and use the operator panel to access your confidential print 
job:

Press Menu until you see 

, and then press Select.

Press Menu

until you see 

, and then press Select. 

Press Menu until you see your user name, and then press Select.

Enter your four-digit personal identification number (PIN) using the 
numbered buttons on the operator panel. As you enter your PIN, asterisks 
appear on the display.

Press Menu until you see 

, and then press Select. (

 sends all jobs with the same user name and PIN immediately to 

the printer.)

Press Menu

until you see the job you want to print, and then press Select. 

Press Go to send the job to the printer.

After the job prints, the job is deleted from printer memory and the printer returns to 
the 

 state.

This section shows how to clear jams based on the operator panel jam messages. 
To clear any jam, grasp the jammed media with two hands and pull it gently away 
from the printer to remove it.

Do not attempt to clear any jam using tools or instruments. 
This may permanently damage the printer.

The inside of the printer near the fuser is hot.

To access jams behind the rear door, open the rear door and pull open both the 
fuser pressure release levers. Remember to reposition the fuser pressure release 
levers once you have removed the jam.

 

For a jam in an optional 530-sheet tray, you may not need to fully remove the 
tray from its drawer.

1

 Menu 

2

Select 

3

Return 

4

Go 

5

Stop 

6

Rear door release lever

Fuser 
pressure 
release 
levers

Rear door release lever

Fuser 
pressure 
release 
levers