SpeakerCraft aim lcr 5 User Guide
SPECIFICATIONS
Speaker Type:
Tweeter:
Woofers:
Impedance:
Sensitivity:
Frequency Adjustments:
Frequency Response:
Power Handling:
Cut Out Dimensions (L x H):
Dimensions (L x H x D):
LIMITED LIFETIME WARRANTY
SpeakerCraft Inc. warrants to the original retail purchaser only that this SpeakerCraft product will be free from defects in materials and workmanship, provided the
speaker was purchased from a SpeakerCraft Authorized Dealer.
speaker was purchased from a SpeakerCraft Authorized Dealer.
Defective products must be shipped, together with proof of purchase, prepaid insured to the SpeakerCraft Authorized Dealer from whom they were purchased, or to
the SpeakerCraft factory at the address listed on this installation instruction manual. Freight collect shipments will be refused. It is preferable to ship this product in the
original shipping container to lessen the chance of transit damage. In any case, the risk of loss or damage in transit is to be borne by the purchaser. If, upon examina-
tion at the Factory or SpeakerCraft Authorized Dealer, it is determined that the unit was defective in materials or workmanship at any time during this warranty period,
SpeakerCraft or the SpeakerCraft Authorized Dealer will, at its option, repair or replace this product at no additional charge, except as set forth below. If this model
is no longer available and can not be repaired effectively, SpeakerCraft, at its sole option, may replace the unit with a current model of equal or greater value. In
some cases where a new model is substituted, a modification to the mounting surface may be required. If mounting surface modification is required, SpeakerCraft
assumes no responsibility or liability for such modification. All replaced parts and product become the property of SpeakerCraft Inc. Products replaced or repaired
under this Warranty will be returned to the original retail purchaser, within a reasonable time, freight prepaid.
the SpeakerCraft factory at the address listed on this installation instruction manual. Freight collect shipments will be refused. It is preferable to ship this product in the
original shipping container to lessen the chance of transit damage. In any case, the risk of loss or damage in transit is to be borne by the purchaser. If, upon examina-
tion at the Factory or SpeakerCraft Authorized Dealer, it is determined that the unit was defective in materials or workmanship at any time during this warranty period,
SpeakerCraft or the SpeakerCraft Authorized Dealer will, at its option, repair or replace this product at no additional charge, except as set forth below. If this model
is no longer available and can not be repaired effectively, SpeakerCraft, at its sole option, may replace the unit with a current model of equal or greater value. In
some cases where a new model is substituted, a modification to the mounting surface may be required. If mounting surface modification is required, SpeakerCraft
assumes no responsibility or liability for such modification. All replaced parts and product become the property of SpeakerCraft Inc. Products replaced or repaired
under this Warranty will be returned to the original retail purchaser, within a reasonable time, freight prepaid.
This Warranty does not include service or parts to repair damage caused by accident, disaster, misuse, abuse, negligence, inadequate packing or shipping proce-
dures, commercial use, voltage inputs in excess of the rated maximum of the unit, or service, repair or modification of the product which has not been authorized
or approved by SpeakerCraft. This Warranty also excludes normal cosmetic deterioration caused by environmental conditions. This warranty will be void if the Serial
Number on the product has been removed, tampered with or defaced.
dures, commercial use, voltage inputs in excess of the rated maximum of the unit, or service, repair or modification of the product which has not been authorized
or approved by SpeakerCraft. This Warranty also excludes normal cosmetic deterioration caused by environmental conditions. This warranty will be void if the Serial
Number on the product has been removed, tampered with or defaced.
This Warranty is in lieu of all other expressed warranties. If the product is defective in materials or workmanship as warranted above,
the purchaser’s sole remedy shall be repair or replacement as provided above. In no event will SpeakerCraft be liable for any inci-
dental or consequential damages arising out of the use or inability to use the product, even if SpeakerCraft Inc. or a SpeakerCraft
Inc. Authorized Dealer has been advised of the possibility of such damages, or for any claim by any other party. Some states do not
allow the exclusion or limitation of consequential damages, so the above limitation and exclusion may not apply.
the purchaser’s sole remedy shall be repair or replacement as provided above. In no event will SpeakerCraft be liable for any inci-
dental or consequential damages arising out of the use or inability to use the product, even if SpeakerCraft Inc. or a SpeakerCraft
Inc. Authorized Dealer has been advised of the possibility of such damages, or for any claim by any other party. Some states do not
allow the exclusion or limitation of consequential damages, so the above limitation and exclusion may not apply.
All implied warranties on the product are limited to the duration of this expressed Warranty. Some states do not allow limitation on
the length of an implied warranty. If the original retail purchaser resides in such a state, this limitation does not apply.
the length of an implied warranty. If the original retail purchaser resides in such a state, this limitation does not apply.
SpeakerCraft offers a variety of accessories to make your installation of this and other SpeakerCraft products easy, economical, and professional. Contact your
authorized SpeakerCraft Dealer for more information. For technical inquires, please call 1-800-448-0976 or e-mail us at techsupport@speakercraft.com. We are
available to assist you every weekday, except holidays, between the hours of 7:00 a.m. and 5:00 p.m. PST.
authorized SpeakerCraft Dealer for more information. For technical inquires, please call 1-800-448-0976 or e-mail us at techsupport@speakercraft.com. We are
available to assist you every weekday, except holidays, between the hours of 7:00 a.m. and 5:00 p.m. PST.
LIT97605(rev4)
AIM LCR 1
2-Way In-Wall
Pivoting 1" Silk Dome
Two 5
1
⁄
4
" Injection Molded
Graphite Cones
8 ohms
89dB 1W/1m
None
55Hz - 20kHz ± 3dB
80 watts (undistorted)
14
1
⁄
4
" x 7
1
⁄
2
"
(362mm x 191mm)
17
7
⁄
16
" x 9
1
⁄
4
" x 4"
(443mm x 235mm x 101mm)
AIM LCR 3
2-Way In-Wall
Pivoting 1" Aluminum Dome
Two
51
⁄
4
" Aluminum/
Magnesium Cones
6/8 ohms depending on
switch settings
90dB 1W/1m
Front-Mounted 2-Position Bass
and Treble Adjustment Switches
50Hz - 20kHz ± 3dB
100 watts (undistorted)
14
1
⁄
4
" x 7
1
⁄
2
"
(362mm x 191mm)
17
7
⁄
16
" x 9
1
⁄
4
" x 4"
(443mm x 235mm x 101mm)
AIM LCR Five
2-Way In-Wall
Pivoting 1" Aluminum
Magnesium Dome
Two 5
1
⁄
4
" Kevlar Cones
6/8 ohms depending on
switch settings
90dB 1W/1m
Front-Mounted 2-Position Bass
and Treble Adjustment Switches
48Hz - 20kHz ± 3dB
100 watts (undistorted)
14
1
⁄
4
" x 7
1
⁄
2
"
(362mm x 191mm)
17
7
⁄
16
" x 9
1
⁄
4
" x 4"
(443mm x 235mm x 101mm)
LIT97605(rev6)
940 Columbia Ave., Riverside CA 92507 | USA (800) 448 0976 Fax (951) 787 8747 International +1 951 787 0543 | www.speakercraft.com
In our attempt to constantly improve our products, features and specifications are subject to change without notice.