Stealth Cam wd2ir User Guide

Page of 41
STC-WD2-IR 
www.stealthcam.net     Toll Free 877-269-8490 
11
Memory Options 
Your STC-WD2-IR camera is equipped with 16MB built in flash 
memory.  The camera is also equipped with an expendable 
media card slot capable accepting up to 2GB SD card (sold 
separately). With no memory card inserted into the slot, the 
camera will use the built in 16MB memory.  If a SD card is 
inserted into the slot then the camera will bypass the built in 
memory and utilize the SD memory. The front counter display will 
show the number of images on the built in memory unless the 
expansion card is inserted at which point the counter will only 
show the number of images in the expansion card. 
 
Inserting SD card 
Make sure camera is in the OFF position whenever adding or 
removing memory. 
•  Insert SD memory card in to the SD card slot completely and in 
the correct direction as shown by the sticker located at the side 
of the housing. 
•  To remove the SD memory card, depress the SD card and pull