Syswan sw88 Quick Setup Guide
OCTOLINKS SW88 SERIES
Quick Start Guide
For advanced setup please refer to your User Guide on the CD-ROM for more detailed information.
Setup Procedure
Step 1:
Connect your Octolinks SW88 Series multi WAN router
Connect your Octolinks SW88 Series multi WAN router
1. First, verify that your Octolinks SW88 Series router and your cable or DSL modems are powered OFF.
2. Using Ethernet cables connect your Broadband modems to the Octolinks SW88 Series router’s WAN
2. Using Ethernet cables connect your Broadband modems to the Octolinks SW88 Series router’s WAN
ports on the front panel starting from Ethernet port number 1.
3. Connect the Ethernet cables from PCs to the LAN ports of your Octolinks SW88 Series router.
Any LAN port on the Octolinks SW88 Series router will automatically act as an «Uplink» port when
3. Connect the Ethernet cables from PCs to the LAN ports of your Octolinks SW88 Series router.
Any LAN port on the Octolinks SW88 Series router will automatically act as an «Uplink» port when
connected to another Ethernet Switch or Hub.
4. Power ON the modems and wait for synchronization (approx. 30 seconds).
5. Plug in the power cord of the Octolinks SW88 Series router to an electrical outlet and connect it into
4. Power ON the modems and wait for synchronization (approx. 30 seconds).
5. Plug in the power cord of the Octolinks SW88 Series router to an electrical outlet and connect it into
the AC input on the back panel. Immediately the Power LED of your router will light up.
6. The corresponding WAN – Link/ACT LED will be ON if the WAN port is correctly connected to a
6. The corresponding WAN – Link/ACT LED will be ON if the WAN port is correctly connected to a
Broadband modem.
7. For each PC connected to the LAN ports, the corresponding LAN – Link/ACT LED will be ON.
7. For each PC connected to the LAN ports, the corresponding LAN – Link/ACT LED will be ON.