LG PA70G Owner's Manual

Clean your projector to keep it in opti-
mum condition.

If there is any dust or staining on the 
lens surface, you must clean the lens.
Use an air spray or a cleaning cloth to 
clean the lens.
To remove dust or stains, use an air 
spray or apply a small amount of clean-
ing agent onto a swab or soft cloth to 
lightly rub the lens.
Please be aware that liquid may flow 
onto the lens if the product is sprayed 
directly onto the lens.

To clean the projector case, first unplug 
the power cord.
To remove dust or stains, use only a dry, 
lint-free, nonabrasive cloth to polish the 
lens.
Do not use alcohol, benzene, thinners 
or other chemicals, which may damage 
the case.

  Prepare the lens cap and the strap 

supplied as accessories. 

 Insert the end of the strap into the 

hole at the bottom of the lens section 
of the projector. Fix the strap to the 
projector by inserting and pulling the 
other end of the strap into the other 
end.

 Insert the other end of strap into the 

hole of the lens cap, and then pass 
the lens cap through the strap.